UA-SK-Elevator

Name: UA-SK-Elevator
Brand: Ubiquiti
SKU: UASKELEVATORCA
Price: 1285.99 CAD
Availability: OutOfStock

$1,285.99

Elevator Starter Kit

Elevator Starter Kit. Connects to inelevator readers using PoE to authorize user's floor selection. Support for up to 18 floors and digital inputs for car status and emergency.

1 $1,285.99/ea

2-4 $1,280.77/ea

5-9 $1,275.55/ea

10-19 $1,265.11/ea

20+ $1,254.67/ea

Elevator Starter Kit

Fabricant	Ubiquiti
Modèle	UA-SK-Elevator
UPC	810010079152
Catégorie	Surveillance & Security — Accessories
Poids	4.35 lbs
Dimensions (boîte)	9.72" × 3.43" × 11.14" (L×P×H)

TechnicalIn The BoxDocumentsFAQ

Overview

In the Box	(1) Elevator Hub (1) G2 Reader (2) 2-wire PoE extenders (10) Access Cards
Dimensions	40 x 105 x 25 mm (1.6 x 4.1 x 1")
Maximum User Count	6,000
Power Method	PoE++
Weight	PoE in: 77 g (2.7 oz) PoE out: 79 g (2.8 oz)
Enclosure Material	Polycarbonate
NDAA Compliant	✓
Mounting Material	Polycarbonate
Networking Interface	(1) 10/100 MbE (1) Homeplug AV
PoE Interface	PoE input: (1) PoE++, 50V DC, Max. 1.2A PoE output: (1) PoE+, 48V DC, 0.72A
Management	(1) 10/100 MbE
Max. Power Consumption	3W (Without PoE output)
Digital Input	(1) Emergency (1) Car position (5-bit) (1) Car status: Up/Down/Stop/Full (1) Door status: Open/Close
Outputs	(18) Relays Rating 30V DC/2A
ESD/EMP Protection	Air: ± 8kV, contact: ± 4kV
LEDs	White
Buttons	(1) Factory reset Terminal blocks
Ambient Operating Temperature	-10 to 40° C (14 to 104° F)
Ambient Operating Humidity	5 to 95% noncondensing
Certifications	CE, FCC, IC
Software Information	The software version can be checked at https://unifi.ui.com
NFC Card & Keyfob Access	✓
Mobile Unlock	✓
Handwave Request to Exit	✓
Weatherproofing	IP55
UL 294 Level	Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I
Mount Material	Aluminum alloy
Mounting	In-wall, gang box (Included) Junction box (Optional)
Indoor and Outdoor Use	✓
Connectivity	BLE 4.1 NFC
Supported Voltage Range	48V DC
Sensors	Proximity sensor
Speaker	(1) Yes, 0.7W
Button	(1) Factory reset
NFC Read Range	< 30 mm (1.18'')
NFC Frequency	13.56 MHz
NFC Technology	ISO/IEC 14443 Type A MIFARE DESFire UniFi Access Proprietary Security Protocol
PoE Cabling Requirements	Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable.
UL 294 Statement	Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
CAN/ULC-60839-11-1 Grade	Grade assignment: I
Document number, and issue date and/or revision level	UA-G2/UA-G2-Black, V02
Format	ISO 7810 ID-1
Model	UACC-Extender-2Wire-PoE-Tx/Rx

Specs

In the Box	(1) Elevator Hub (1) G2 Reader (2) 2-wire PoE extenders (10) Access Cards
Dimensions	40 x 105 x 25 mm (1.6 x 4.1 x 1")
Maximum User Count	6,000
Power Method	PoE++
Weight	PoE in: 77 g (2.7 oz) PoE out: 79 g (2.8 oz)
Enclosure Material	Polycarbonate
NDAA Compliant	✓
Mounting Material	Polycarbonate
Networking Interface	(1) 10/100 MbE (1) Homeplug AV
PoE Interface	PoE input: (1) PoE++, 50V DC, Max. 1.2A PoE output: (1) PoE+, 48V DC, 0.72A
Management	(1) 10/100 MbE
Max. Power Consumption	3W (Without PoE output)
Digital Input	(1) Emergency (1) Car position (5-bit) (1) Car status: Up/Down/Stop/Full (1) Door status: Open/Close
Outputs	(18) Relays Rating 30V DC/2A
ESD/EMP Protection	Air: ± 8kV, contact: ± 4kV
LEDs	White
Buttons	(1) Factory reset Terminal blocks
Ambient Operating Temperature	-10 to 40° C (14 to 104° F)
Ambient Operating Humidity	5 to 95% noncondensing
Certifications	CE, FCC, IC
Software Information	The software version can be checked at https://unifi.ui.com
NFC Card & Keyfob Access	✓
Mobile Unlock	✓
Handwave Request to Exit	✓
Weatherproofing	IP55
UL 294 Level	Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I
Mount Material	Aluminum alloy
Mounting	In-wall, gang box (Included) Junction box (Optional)
Indoor and Outdoor Use	✓
Connectivity	BLE 4.1 NFC
Supported Voltage Range	48V DC
Sensors	Proximity sensor
Speaker	(1) Yes, 0.7W
Button	(1) Factory reset
NFC Read Range	< 30 mm (1.18'')
NFC Frequency	13.56 MHz
NFC Technology	ISO/IEC 14443 Type A MIFARE DESFire UniFi Access Proprietary Security Protocol
PoE Cabling Requirements	Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable.
UL 294 Statement	Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
CAN/ULC-60839-11-1 Grade	Grade assignment: I
Document number, and issue date and/or revision level	UA-G2/UA-G2-Black, V02
Format	ISO 7810 ID-1
Model	UACC-Extender-2Wire-PoE-Tx/Rx

✓(1) Elevator Hub
✓(1) G2 Reader
✓(2) 2-wire PoE extenders
✓(10) Access Cards
✓Elevator Hub
✓Dimensions
✓129.3 x 244.7 x 33.6 mm
✓(5.1 x 9.6 x 1.3")
✓Maximum User Count
✓6,000
✓Power Method
✓PoE++
✓UL 294 Power-limited Class 2 PSU
✓UL 60950-1/62368-1 LPS/PS2 PSU
✓Weight
✓537 g (1.2 lb)
✓Enclosure Material
✓Polycarbonate
✓NDAA Compliant
✓Mounting Material
✓Polycarbonate
✓Networking Interface
✓(4) 10/100/1000 Base-T
✓PoE Interface
✓(1) PoE++ input, 50V DC, 1.2A
✓(4) PoE+ outputs, 50V DC, 30W per port
✓(Max 45W aggregated)
✓Management
✓(1) 10/100/1000 Base-T
✓Max. Power Consumption
✓7W (Without PoE output)
✓Digital Input
✓(1) Emergency
✓(1) Car position (5-bit)
✓(1) Car status: Up/Down/Stop/Full
✓(1) Door status: Open/Close
✓Outputs
✓(18) Relays
✓Rating 30V DC/2A
✓ESD/EMP Protection
✓Air: ± 8kV, contact: ± 4kV
✓LEDs
✓B/W Learn More
✓Buttons
✓(1) Factory reset
✓Terminal blocks
✓Ambient Operating Temperature
✓-10 to 40° C (14 to 104° F)
✓Ambient Operating Humidity
✓5 to 95% noncondensing
✓Certifications
✓CE, FCC, IC, UL 62368-1, CSA C22.2 No. 62368-1
✓Software Information
✓The software version can be checked at https://unifi.ui.com
✓G2 Reader
✓Dimensions
✓93 x 40 x 36.5 mm
✓(3.7 x 1.6 x 1.4")
✓NFC Card & Keyfob Access
✓Mobile Unlock
✓Handwave Request to Exit
✓Weatherproofing
✓IP55
✓NDAA Compliant
✓UL 294 Level
✓Destructive attack: Level I
✓Line security: Level I
✓Endurance: Level I
✓Standby power: Level I
✓Weight
✓82 g (2.9 oz)
✓Enclosure Material
✓Polycarbonate, glass
✓Mount Material
✓Aluminum alloy
✓Mounting
✓In-wall, gang box (Included)
✓Junction box (Optional)
✓Indoor and Outdoor Use
✓Ambient Operating Temperature
✓-30 to 45° C (-22 to 113° F)
✓Ambient Operating Humidity
✓5 to 90% noncondensing
✓Networking Interface
✓(1) 10/100 MbE RJ45 port
✓Connectivity
✓BLE 4.1
✓NFC
✓Power Method
✓PoE
✓UL 294 Power-limited Class 2 PSU
✓UL 60950-1/62368-1 LPS/PS2 PSU
✓Max. Power Consumption
✓5W
✓Supported Voltage Range
✓48V DC
✓ESD/EMP Protection
✓Air: ± 15kV, contact: ± 8kV
✓Sensors
✓Proximity sensor
✓Speaker
✓(1) Yes, 0.7W
✓LEDs
✓R/G/B/W Learn More
✓Button
✓(1) Factory reset
✓NFC Read Range
✓< 30 mm (1.18'')
✓NFC Frequency
✓13.56 MHz
✓NFC Technology
✓ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340)
✓MIFARE Classic / MIFARE DESFIRE
✓Sony FeliCa™ (ID only)
✓NFC Forum tags T1T, T2T, T3T, T4T and T5T
✓PoE Cabling Requirements
✓Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
✓The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable.
✓UL 294 Statement
✓Compliance with IEEE 802.3 specifications was not verified as part of UL 294.
✓The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
✓CAN/ULC-60839-11-1 Grade
✓Grade assignment: I
✓Certifications
✓CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
✓Document number, and issue date and/or revision level
✓UA-G2/UA-G2-Black, V02
✓Software Information
✓The software version can be checked at https://unifi.ui.com
✓Access Card
✓Dimensions
✓85.6 x 53.98 x 0.84 mm
✓(3.37 x 2.13 x 0.03")
✓Weight
✓5 g (0.18 oz)
✓Format
✓ISO 7810 ID-1
✓NFC Frequency
✓13.56 MHz
✓NFC Technology
✓ISO/IEC 14443 Type A
✓MIFARE DESFire
✓UniFi Access Proprietary Security Protocol
✓NDAA Compliant
✓Wire PoE Extenders
✓Model
✓UACC-Extender-2Wire-PoE-Tx/Rx
✓Dimensions
✓40 x 105 x 25 mm
✓(1.6 x 4.1 x 1")
✓Weight
✓PoE in: 77 g (2.7 oz)
✓PoE out: 79 g (2.8 oz)
✓Enclosure Material
✓Polycarbonate
✓Mounting Material
✓Polycarbonate
✓NDAA Compliant
✓Networking Interface
✓(1) 10/100 MbE
✓(1) Homeplug AV
✓PoE Interface
✓PoE input: (1) PoE++, 50V DC, Max. 1.2A
✓PoE output: (1) PoE+, 48V DC, 0.72A
✓Management
✓(1) 10/100 MbE
✓Power Method
✓PoE++
✓Max. Power Consumption
✓3W (Without PoE output)
✓ESD/EMP Protection
✓Air: ± 8kV, contact: ± 4kV
✓LEDs
✓White
✓Ambient Operating Temperature
✓-10 to 40° C (14 to 104° F)
✓Ambient Operating Humidity
✓5 to 95% noncondensing
✓Certifications
✓CE, FCC, IC